Official thread for non-ps3 renderers (Bravia, etc.)

[bokicat]

I tried PMS latest stable version and beta version with my Popcorn C-200/A-200. At first, the PMS would detect the unit as WDTV Live, so I went into the renderer profile (Popcorn.conf) and edit UserAgentSearch=SYABAS|C-200. It works for the detection part.

However, with all the RMVB files I always get "Could not play" message on my C-200/A-200 screen. The folders and files are browsable and accessible. The AVIs are working (I guess it sends without transcoding), but just not RMVB. I tested the same setup with Realtek's Xtreamer, RMVB played fine. I forced transcoding in the conf because Xtreamer support RMVB natively.

Any help?

[clarkaroo]

I'm using XBMC and the PS3 as a UPNP server. When I try to watch a mkv file (in a rar-archive) the PS3MS is using MEncoder on the file. If I unrar the file the [MEncoder] tag behind the file disappears. Bug?

[deadsoulz]

Anyone got this working with the LG BD-390 ??? Or have a profile they think might work. I am using the latest 381 beta.

TIA

--ds

[deadsoulz]

Another request for LG BD390 support.
I really enjoy this on the PS3, and it would be wonderful on the LG.
I will gladly donate if this is possible.

Anyone ever get the BD390 working? If so please Post or PM me your .conf file.

It appears to be identified as a WDTv Live by PS3 Media Server. I can browse the directory structure, but when I try and play it video it just times out and sits there.

[maccroche]

Hi,

In addition to the previous tests made in the previous thread:
viewtopic.php?f=2&t=2099#p24868

find the tests done with release 389 found on http://otmanix.de/2010/02/10/ps3-media- ... build-389/

Installation:
* a PC IP=10.0.0.140 as Server using XP sp 3
* a Sony KDL 32V5500 as TV IP=10.0.0.139: it is correctly recognised. Firmware 1.6
* Java build 1.6.0_13-b03
ps3mencoder is also installed

Is is possible to avoid ps3mencoder? Without it is not possible to stream youtubes files...

I tried to use different file formats for each category.

Tests done and results in the order:

* Images files:
-Jpg is working
-imagefeed is ok

Do you know if is it possible to convert gif / wmf files

* Audio files:
mp3 files are ok
wav files are not correctly played why
audiofeed.Web,Audio,Podcast=http://podcasts.engadget.com/rss.xml is working, but the duration is not displayed

the following streams are not working:
audiostream.Web,Audio,Radio=darc section 8000,http://dark-section.eu:8000/
audiostream.Web,Audio,Radio=Schwarze Welle m3u,http://www.schwarze-welle.de/play.m3u
audiostream.Web,Audio,Radio=KBPS All-classical pls,http://www.abacast.com/media/pls/classical899/classical899-classical899-96.pls
audiostream.Web,Audio=FM4 udp,udp://@239.0.2.10:8224

Is it possible to force the use of VLC for those audiotream

Movie files
testavi.avi: there is no thumb
testflv.flv works ok
testm4v.m4v works ok
testmp4.mp4 works ok
testmpg.mpg doesn't work
testmpg2.mpg doesn't work
videostream.Web,Video=Lala TV udp,udp://@239.0.2.40:8208 works ok
videofeed.Web,Video,Youtube=http://gdata.youtube.com/feeds/base/standardfeeds/top_rated?client=ytapi-youtube-browse&alt=rss works, but the duration is not displayed

You can find enclosed the log and conf files
debug-ps3mencoder_log.zip with the debug.log and ps3mencoder.log files
web-PMS-ps3mencoder-bravia5500.zip with the conf files

Hope it helps.
If you need more specific test, let it know.

[deadsoulz]

Debug Log when trying to launch a video with LG BD-390 with the latest build (392)

[New I/O server worker #1-2] DEBUG 16:05:23.828 End of analysis
[New I/O server worker #1-2] DEBUG 16:05:24.436 Sent to socket: Content-Length: 7574
[New I/O server worker #1-2] DEBUG 16:05:24.436 Sent to socket: Content-Type: text/xml; charset="utf-8"
[New I/O server worker #1-2] DEBUG 16:05:24.436 Sent to socket: Server: Windows_7-x86-6.1, UPnP/1.0, PMS/1.20.392
[New I/O server worker #1-3] DEBUG 16:05:45.196 Opened handler on socket /10.0.1.3:40239 // WD TV Live
[New I/O server worker #1-3] DEBUG 16:05:45.196 Handler infos: HTTP/1.1 : GET : get/0$0$1$1/A+Christmas+Story+%5B1983%5D+%5BDVDRiP+XviD%5D.avi
[New I/O server worker #1-3] DEBUG 16:05:45.196 Received on socket: Accept: */*
[New I/O server worker #1-3] DEBUG 16:05:45.196 Received on socket: Host: 10.0.1.2:5001
[New I/O server worker #1-3] DEBUG 16:05:45.196 Received on socket: Range: bytes=0-15
[New I/O server worker #1-3] INFO 16:05:45.196 HTTP: get/0$0$1$1/A+Christmas+Story+%5B1983%5D+%5BDVDRiP+XviD%5D.avi / 0-15
[New I/O server worker #1-3] DEBUG 16:05:45.196 Searching for objectId: 0$0$1$1 with children option: false
[New I/O server worker #1-3] DEBUG 16:05:45.197 Asked stream chunk [0-15] timeseek: 0.0 of A Christmas Story [1983] [DVDRiP XviD].avi and player null
[New I/O server worker #1-3] DEBUG 16:05:45.280 Sent to socket: Accept-Ranges: bytes
[New I/O server worker #1-3] DEBUG 16:05:45.281 Sent to socket: Connection: keep-alive
[New I/O server worker #1-3] DEBUG 16:05:45.281 Sent to socket: Content-Length: 733853696
[New I/O server worker #1-3] DEBUG 16:05:45.281 Sent to socket: Content-Range: bytes 0-15/733853696
[New I/O server worker #1-3] DEBUG 16:05:45.281 Sent to socket: Content-Type: video/avi
[New I/O server worker #1-3] DEBUG 16:05:45.281 Sent to socket: Server: Windows_7-x86-6.1, UPnP/1.0, PMS/1.20.392
[New I/O server worker #1-3] INFO 16:05:47.279 Calling SetThreadExecutionState ES_CONTINUOUS

Never starts playing the video. Any thoughts?

[muchgooder.com]

I have a Brite-View player that worked fine until I upgraded to 392. I am using the realtek.conf file that was recommended in another thread.

I can browse the directories just as I used to. When I click on an audio file (regardless of format) and the menu just sits there. When I try to play video files (regardless of format) I see a "format not supported" message. In both cases nothing is written back to the trace log. Once again, all of these files worked before the upgrade.

Any ideas?

[ha100]

Hi,
I keep having problems with ntsc movies on my Bravia W5500. Sometimes the sound gets screwed when subs are activated but sometimes even without subs. Probably not transcoded to the exact right format. The movie plays a little too fast as well. What can this be?

[sidplayos2]

Just tried r396 and began testing the "MediaInfo" section. Now I'm not sure if I'm jumping th gun here, as it may only be correctly implemented for the PS3 at the moment. However I thought I'd give it a shot with my Denon receiver. First I created the renderer file below for the Denon (including the invoke string from the Device Spy).

It starts up and detects the Denon, however when I go to select the media library directory the logs get stuck in some kind of loop with the following:

Code: Select all

[New I/O server worker #1-2] DEBUG 20:36:05.156 Searching for objectId: 0 with children option: true
[New I/O server worker #1-2] DEBUG 20:36:05.328 End of analysis
[New I/O server worker #1-2] DEBUG 20:36:05.328 Sent to socket: Content-Length: 1665
[New I/O server worker #1-2] DEBUG 20:36:05.328 Sent to socket: Content-Type: text/xml; charset="utf-8"
[New I/O server worker #1-2] DEBUG 20:36:05.328 Sent to socket: Server: Windows_2003-amd64-5.2, UPnP/1.0, PMS/1.20.396
[New I/O server worker #1-3] DEBUG 20:36:05.468 Opened handler on socket /10.11.12.200:1055 // Denon-4810CI
[New I/O server worker #1-3] DEBUG 20:36:05.468 Handler infos: HTTP/1.1 : POST : upnp/control/content_directory
[New I/O server worker #1-3] DEBUG 20:36:05.468 Received on socket: CONNECTION: close
[New I/O server worker #1-3] DEBUG 20:36:05.468 Received on socket: Content-Length: 599
[New I/O server worker #1-3] DEBUG 20:36:05.468 Received on socket: CONTENT-TYPE: text/xml ; charset="utf-8"
[New I/O server worker #1-3] DEBUG 20:36:05.468 Received on socket: Host: 10.11.12.250:5001
[New I/O server worker #1-3] DEBUG 20:36:05.468 Received on socket: SOAPACTION: "urn:schemas-upnp-org:service:ContentDirectory:1#Browse"
[New I/O server worker #1-3] DEBUG 20:36:05.468 Received on socket: USER-AGENT: KnOS/3.2 bridgeCo-DMP/3.0 DLNADOC/1.50 INTEL_NMPR/2.0
[New I/O server worker #1-3] INFO  20:36:05.468 HTTP: upnp/control/content_directory / 0-0
[New I/O server worker #1-3] DEBUG 20:36:05.468 Searching for objectId: 0 with children option: true
[New I/O server worker #1-3] DEBUG 20:36:05.468 End of analysis
[New I/O server worker #1-3] DEBUG 20:36:05.468 Sent to socket: Content-Length: 601
[New I/O server worker #1-3] DEBUG 20:36:05.468 Sent to socket: Content-Type: text/xml; charset="utf-8"
[New I/O server worker #1-3] DEBUG 20:36:05.468 Sent to socket: Server: Windows_2003-amd64-5.2, UPnP/1.0, PMS/1.20.396
[New I/O server worker #1-4] DEBUG 20:36:05.765 Opened handler on socket /10.11.12.200:1056 // Denon-4810CI
[New I/O server worker #1-4] DEBUG 20:36:05.765 Handler infos: HTTP/1.1 : POST : upnp/control/content_directory
[New I/O server worker #1-4] DEBUG 20:36:05.765 Received on socket: CONNECTION: close
[New I/O server worker #1-4] DEBUG 20:36:05.765 Received on socket: Content-Length: 599
[New I/O server worker #1-4] DEBUG 20:36:05.765 Received on socket: CONTENT-TYPE: text/xml ; charset="utf-8"
[New I/O server worker #1-4] DEBUG 20:36:05.765 Received on socket: Host: 10.11.12.250:5001
[New I/O server worker #1-4] DEBUG 20:36:05.765 Received on socket: SOAPACTION:

If I set MediaInfo=false it (almost) behaves allowing me to traverse the directories, although then I get multiple directory entris added as mentioned in my thread here:

http://www.ps3mediaserver.org/forum/viewtopic.php?f=6&t=5657

I think the MediaInfo method is the way to go, but should I be trying it yet or too early?
I would like to get this working for the Denon so if theres any info or tests I can help with please let me know.

Cheers

[shagrath]

I think the MediaInfo method is the way to go, but should I be trying it yet or too early?
I would like to get this working for the Denon so if theres any info or tests I can help with please let me know.

Cheers

maybe, I think there's more tests to do :p thanks for inputs, this"ll help